TA-2: Ultimax Tri-Anchor

Regular price $42.50

Shipping calculated at checkout.

Ultimax Tri-Anchor
Model TA-2

High-quality Tie-Down Anchors designed to complement BLACK+GRAY's distinctive line of motorcycle, roadracing and transport products. Unique in the industry for their strength, materials, flexibility and range of applications.

  • Unique heavy-duty design provides multiple tie-down strap/hook attachment points
  • Easily installed on wall or floor surface
  • For use in open or closed trucks and trailers to provide secure anchor points for motorcycles and other cargo during transport
  • Can be used to secure motorcycles, dirt bikes, Can-Am Spyders, ATVs, snowmobiles or other cargo
  • Patent No. US 7,686,551 B2 & US 8,414,237 B2
  • Made in USA

WARNING: Do not use any Ultimax Tie-Down Anchors for overhead lifting.

Product Details

  • 8 gauge, (.164") very high quality, heat treated 4130 steel
  • Weight: 12 oz / 0.34 kg
  • High-quality polyester powder-coat finish
  • 14 gauge (.074") zinc plated (for corrosion resistance) reinforcement plates available
  • 5/16" grade 5 zinc plated mounting hardware is included
  • Designed, Engineered, Tested and Manufactured in the USA

Ultimax Tie-Down Anchors are tested and load-rated at angles of 90°, 45° and 30°
WLL (working load limit) factor of safety = 3

  • 90° Working Load Limit: 1,866 lbs/ 846 kg
  • 90° Vertical Breaking Strength: 5,600 lbs / 2,540 kg

  • 45° Working Load Limit: 2,866 lbs/1,300 kg
  • 45° Angle Breaking Strength: 8,600 lbs / 3,900 kg

  • 30° Working Load Limit: 3,100 lbs / 1,406 kg
  • 30° Angle Breaking Strength: 9,300 lbs / 4,218 kg

  • The working load limit of a component or tie-down assembly is 1/3 of the product's rated capacity or breaking strength (breaking strength is the load a component or assembly will withstand before failure). Never exceed the Working Load Limits (WLL) published for each Ultimax Tie-Down under any condition.


    A MODEL FOR EVERY APPLICATION

    Six Ultimax Tie-Down Anchor models provide options for vertical or horizontal mounting, in open or corner applications. They range from a simple one-piece anchor to a unique recessed anchor that rotates 360º without axles or pins. All are manufactured of 4130 steel alloy with powdercoat finishes. Selected models include 304 stainless steel rings.

    Unlike off-the shelf, off-shore-manufactured products offered by competitors, Ultimax Tie-Down Anchors are designed, engineered, tested and manufactured in the USA.

    Ultimax Tie-Down Anchors are tested and load-rated at angles of 90°, 45° and 30°.

    WARNING: Do not use any Ultimax Tie-Down Anchors for overhead lifting.


    QUALITY YOU CAN COUNT ON

    BLACK+GRAY's reputation as an innovator in motorcycle, roadracing and transport products is based on 30 years experience in design, engineering and motorcycle riding, racing and hauling. Ultimax Tie-Down Anchors fill the void in high-quality, application-specific hardware for motorcycle and other transport needs.

    Look carefully at existing tie-down hardware and we think you'll agree that serious motorcyclists and road racers deserve better. Competitors' web sites feature the same six or seven off-shore manufactured,cheaply plated or unfinished products. They provide little or no information on the materials used in manufacturing. They cite load ratings but provide little or no verifiable information on what those ratings mean. They say that products are tested but don't say how and by what standards. They use test ratings for 90º vertical loads as benchmarks, when standard practice is to tie down motorcycles at 30º to 45º.

    At BLACK+GRAY we took a different approach. Our intention was to create top quality hardware with design distinction and special function for specific conditions and applications. We started out by looking at what our customers need and where existing products fail to fill the bill. We conducted regulatory research to define product standards (and discovered that although there are government regulations for many aspects of cargo transport, there are none that specifically address the anchors to which cargo is tied. Consumer Beware.) We did extensive materials research and testing. We explored scores of design solutions and had final prototypes evaluated using FEA (Finite Element Analysis) by consulting engineers who count NASA among their clients. We tested production-ready Ultimax Tie-Down Anchors in our own facility using stringent, verifiable standards and procedures. And we contracted with US manufacturers to supply high quality parts.


    load-rating test for tie-down anchors
    tie-down anchor 45º load test
    tie-down anchor strength testing
    tie down hydraulic cylinder ram testing

    FEA analysis for tie-down anchor
    tie down anchor loading test
    normal loading stress analysis for tie-down anchor
    stress analysis for tie-down anchor
    DESIGN MATTERS

    tie down anchor styling
    tie down anchor design

    What you get is what you see… and at BLACK+GRAY what you see matters. Our goal is to design innovative products that are as elegant in the way they look as the motorcycles they complement. That goes for everything we do – from wheel chocks to apparel to hardware to the way we package what we sell.

    What you get is also more than what you see. At BLACK+GRAY we are serious about function, performance and quality. We design and manufacture products for people who won’t settle for "good enough." Ultimax Tie-Down Anchors are in a class by themselves. Unique in appearance and attention to detail, they are also unique in the industry for their strength, materials, flexibility and range of application.

    You can get cheaper but you can’t get better.

    unique tie down anchor sketcg
    tie down anchor design and development
    MATERIALS AND TESTING

    All Ultimax Tie-Down Anchors are made from high carbon steel 4130 alloy then heat treated. High and Medium carbon steels allow the heat treatment to penetrate, producing a much stronger material than low carbon steel, which is merely surface hardened. Ultimax models that employ rings feature 304 stainless steel rings manufactured by a US marine supplier. Grade 5 carriage bolts and locking nuts are supplied. Parts are powder coated to provide a durable, good-looking finish.
    Ultimax Tie-Down Anchors were tested by BLACK+GRAY using certified load scales and a custom built testing jig driven by a hydraulic cylinder ram. Tests were conducted at 90°, 45° and 30°. (The 90° standard was developed by the lifting industry which manufactures cranes and other vertical equipment. Pull data at 90° are much less critical for motorcycle tie-down than data at the most frequently used 45° and 30° positions.) BLACK+GRAY tested all models at all three angles to enable customers to choose the appropriate solution for their vehicle, cargo, use conditions and trailer design and construction.

    tie down anchor wireframe model
    tie down anchor rendering
    tie down anchor concept design
    tie down anchor development